Haas Mill G82 Spot Drill Canned Cycle

Haas G Codes Mill Reference

G82 Spot Drill Canned Cycle (Group 09)

F Feedrate in inches (or mm) per minute
L Number of holes if G91 (Incremental Mode) is used
P The dwell time at the bottom of the hole
R Position of the R plane (position above the part)
X X-axis location of hole
Y Y-axis location of hole
Z Position of bottom of hole

Programming Note: G82 is similar to G81 except that there is the option to program a dwell (P)

Program Example                         Description
%
O1234                                  (Sample program)
T1 M06                                 (Tool #1 is a 0.5” x 90-degree spot drill)
G90 G54 G00 X.565 Y-1.875 S1275 M03
G43 H01 Z0.1 M08
G82 Z-0.175 P.3 R0.1 F10.              (90-degree spot drill; the depth is)
X1.115 Y-2.750                         (half of the chamfer diameter)
X3.365 Y-2.875
X4.188 Y-3.313
X5.0 Y-4.0
G80 G00 Z1.0 M09

1


G82 Spot Drill Canned Cycle