G95 Feed per Revolution (Group 05)
When G95 is active, a spindle revolution will result in a travel distance specified by the Feed value. If Setting 9 is set to “Inch”, then the feed value F will be taken as inches/rev (set to MM, then the feed will be taken as mm/rev). Feed Override and Spindle Override will affect the behavior of the machine while G95 is active. When a Spindle Override is selected, any change in the spindle speed will result in a corresponding change in feed in order to keep the chip load uniform. However, if a Feed Override is selected, then any change in the Feed Override will only affect the feed rate and not the spindle.
G95 Feed per Revolution